OSB 4 TOP Straight Edge
Our Egger OSB 4 TOP has many properties that go beyond the OSB 4 standard of EN 300. The very high load-bearing capacity and stiffness, as well as the high moisture resistance and dimensional stability, offer a high degree of safety in all construction applications.
They have a 3-layer structure of flat aligned strands (micro-veneers). The two cover layers are aligned parallel to each other, the middle layer is perpendicular to them. This layer structure is the reason for the good mechanical strength properties.
They have a 3-layer structure of flat aligned strands (micro-veneers). The two cover layers are aligned parallel to each other, the middle layer is perpendicular to them. This layer structure is the reason for the good mechanical strength properties.
Contact:
Christian Lackner
- +43 50 600 10159
Contact:
Christian Lackner
- +43 50 600 10159
Note
All shown decors are reproductions.
More transparency
Further information on our sustainability indicators
What makes the OSB 4 TOP from EGGER so special
Thanks to its first-class properties, EGGER OSB 4 TOP is the ideal panel for timber construction – whether in roofs, walls, ceilings or floors. The OSB 4 TOP offers reliable and durable real timber construction quality:
• stiffening,
• secure vapour barrier
• airtight level due to guaranteed minimum air permeability of ≤ 0.12 m³/(m²h) even for the highest requirements.
• stiffening,
• secure vapour barrier
• airtight level due to guaranteed minimum air permeability of ≤ 0.12 m³/(m²h) even for the highest requirements.
An overview of the advantages in application:
- Available formats of up to 3.30m length allow ceiling height constructions and enable an economical and cut-optimized wall planking.
The EGGER OSB 4 TOP offers a hugher moisture resistance compared to OSB 3 which results in an improved dimensional stability. This leads to more safety on the construction site and in the building.
- EGGER OSB 4 TOP with straight edges are produced in the thickness range from 12 to 25 mm with a guaranteed raw density of at least 620 kg/m3. As a result, they have a reduced burn-up rate and offer advantages in fire protection certification.
- It goes without saying that we guarantee all properties through the comprehensive and meaningful CE declaration of performance (DoP) .
OSB 4 TOP is available in different thicknesses
The OSB 4 TOP is available in a wide range of formats and thicknesses. Please refer to our current delivery programme for information.
Emission classes
The production mainly uses fresh coniferous wood,a formaldehyde-free bonding system and paraffin wax. As a result, the formaldehyde emissions are well below all the currently known limit values of wood-based panels.
Our OSB 4 TOP is 100% bonded without formaldehyde. The formaldehyde emissions of our OSB 4 TOP correspond to emission similar to untreated wood.
Processing instruction and leaflets
- Transport and Handling Instructions OSB and DHF TLBP001 (English/PDF)
- Storage Instructions for OSB and DHF TLBP002 (English/PDF)
- Thickness Application Guideline OSB and DHF TLBP102 (English/PDF)
- Material characteristics hygrothermal simulation OSB and DHF TLBP552 (English/PDF)
- Static Design Guideline OSB und DHF TLBP103 (English/PDF)
- Charring rate EGGER OSB TLBP451 (EN/PDF)