- Produktai
- Taikymas
The EGGER OSB 3 with tongue and groove profiles are the typical panels for a wide range of applications. Designed as type OSB 3 according to EN 300, it has sound mechanical strength, stiffness and good durability in service class 2, even under temporarily humid ambient conditions. Their technical properties make them suitable for various applications.
Tvarumas
-
<ul> <li>-805 kg CO2e/m3 Bendrasis VAP<ul> <li>172 kg CO2e/m3 VAP dėl iškastinio kuro</li> <li>-978 kg CO2e/m3 VAP dėl biogeninio anglies dioksido</li> <li>0,3 kg CO2e/m3 VAP dėl žemės naudojimo ir žemės naudojimo paskirties keitimo</li> </ul>
-
<ul> <li>0 % Iš žiedinės ekonomikos gautos medžiagos<ul> <li>0 % Iki vartojimo etapo perdirbta medžiaga</li> <li>0 % Po vartojimo etapo perdirbta medžiaga</li> <li>0 % Lentpjūvių pramonės šalutiniai produktai</li> </ul> </li> <li>100 % Pirminės žaliavos</li> </ul>
-
<ul> <li>95 % Atsinaujinantys ištekliai</li> <li>5 % Iškastiniai ištekliai</li> <li>0 % Mineraliniai ištekliai</li> </ul>
-
The calculation of the values refers to the locations Wismar and Radauti.
Advantages of the OSB 3 Tongue and Groove in application
Emisijos klasės
The gluing systems of our OSB 3 boards fall well below the strict standard requirements for formaldehyde emission in interiors. All our products comply with the formaldehyde emission limit value of 0.062 mg/m³ applicable in the EU from 6 August 2026.
Depending on your requirements, our OSB boards are available in the following bonding types and trade names:
OSB 3 E0 = bonded with 100% formaldehyde-free adhesive, formaldehyde emission like untreated wood; REACH requirement for formaldehyde emission ≤ 0.062 mg/m³ met.
OSB 3 TOP = bonded with 100% formaldehyde-free adhesive, formaldehyde emission like untreated wood; REACH requirement for formaldehyde emission ≤ 0.062 mg/m³ met.
OSB 3 E05 = bonded with low emissions in compliance with the European REACH requirement for formaldehyde emission ≤ 0.062 mg/m³.
OSB 3 E1 = bonded with low emissions in compliance with the European E1 limit value according to EN 13986:2004+A1:2015