OSB 4 TOP Tongue and Groove

Produktai
Taikymas

Our Egger OSB 4 TOP with tongue and groove profiles exceed the standards. With the excellent mechanical strength and stiffness properties, the EGGER OSB 4 TOP is a cost efficient solution for projects and applications with high technical requirements.

Tvarumas

CO2 pėdsakas*

-805 kg CO2e/m3 Bendrasis VAP
- 172 kg CO2e/m3 VAP dėl iškastinio kuro
- -978 kg CO2e/m3 VAP dėl biogeninio anglies dioksido
- 0,3 kg CO2e/m3 VAP dėl žemės naudojimo ir žemės naudojimo paskirties keitimo

Iš žiedinės ekonomikos gautų medžiagų dalis**

0 % Iš žiedinės ekonomikos gautos medžiagos
- 0 % Iki vartojimo etapo perdirbta medžiaga
- 0 % Po vartojimo etapo perdirbta medžiaga
- 0 % Lentpjūvių pramonės šalutiniai produktai
100 % Pirminės žaliavos

Atsinaujinančių išteklių dalis**

92 % Atsinaujinantys ištekliai
7 % Iškastiniai ištekliai
1 % Mineraliniai ištekliai

Perdirbamumas

*Visuotinio atšilimo potencialo (GWP) duomenys pateikti remiantis išoriškai patikrinta aplinkosaugine produkto deklaracija (EPD) pagal ISO 14025 ir EN 15804+A2 (modulio gamybos etapas A1–A3).

**Šis „EcoFact“ pagrįstas vidiniu skaičiavimu, naudojant gamybos duomenis.

Advantages of the OSB 4 TOP Tongue and Groove in application

The EGGER OSB 4 TOP is a safe bet for the production of durable, load-bearing roof formworks and subflooring even with large span due to their high bending strength and stiffness.
The high moisture resistance and dimensional stability of the EGGER OSB 4 TOP leads to greater safety during transport, the construction period and in the finished building.
Due to the stable and precise tongue and groove profile, OSB 4 TOP can be installed quickly and easily.
For the OSB 4 TOP, we provide the CE declaration of performance (DOP) with the tested calculation values for the static proof, even for a board thickness of 30 mm.
The OSB 4 TOP tongue and groove is ideal for floating installation thanks to its high stiffness.
The EGGER OSB 4 TOP tongue and groove panels are available in thicknesses from 12 to 25 mm with a guaranteed characteristic raw density of over 620 kg/m3. As a result, they have a reduced burning rate and offer advantages in fire protection certification.

Emisijos klasės

The production mainly uses fresh coniferous wood,a formaldehyde-free bonding system and paraffin wax. As a result, the formaldehyde emissions are well below all the currently known limit values of wood-based panels.

Our OSB 4 TOP is 100% bonded without formaldehyde. The formaldehyde emissions of our OSB 4 TOP correspond to emission similar to untreated wood.

Dokumentai ir atsisiuntimai

All documents

Processing instruction and leaflets

Kalbos pasirinkimas