- Produktai
- Taikymas
Our Egger OSB 4 TOP has many properties that go beyond the OSB 4 standard of EN 300. The very high load-bearing capacity and stiffness, as well as the high moisture resistance and dimensional stability, offer a high degree of safety in all construction applications.
They have a 3-layer structure of flat aligned strands (micro-veneers). The two cover layers are aligned parallel to each other, the middle layer is perpendicular to them. This layer structure is the reason for the good mechanical strength properties.
Tvarumas
-
100 % verified legal wood origin 50 % of that certified
-
7 % wood from circular economy, 7 % of that by-products from sawmill industry, 93 % wood from sustainable forestry
-
-805 kg CO2-eq/m³
-
93 % material from renewable resources
-
The calculation of the values refers to the location Wismar.
What makes the OSB 4 TOP from EGGER so special
Thanks to its first-class properties, EGGER OSB 4 TOP is the ideal panel for timber construction – whether in roofs, walls, ceilings or floors. The OSB 4 TOP offers reliable and durable real timber construction quality:
- stiffening,
- secure vapour barrier
- airtight level due to guaranteed minimum air permeability of ≤ 0.12 m³/(m²h) even for the highest requirements.
An overview of the advantages in application:
- Available formats of up to 3.30m length allow ceiling height constructions and enable an economical and cut-optimized wall planking.
- The EGGER OSB 4 TOP offers a hugher moisture resistance compared to OSB 3 which results in an improved dimensional stability. This leads to more safety on the construction site and in the building.
- EGGER OSB 4 TOP with straight edges are produced in the thickness range from 12 to 25 mm with a guaranteed raw density of at least 620 kg/m3. As a result, they have a reduced burn-up rate and offer advantages in fire protection certification.
- It goes without saying that we guarantee all properties through the comprehensive and meaningful CE declaration of performance (DoP).
Emisijos klasės
The production mainly uses fresh coniferous wood,a formaldehyde-free bonding system and paraffin wax. As a result, the formaldehyde emissions are well below all the currently known limit values of wood-based panels.
Our OSB 4 TOP is 100% bonded without formaldehyde. The formaldehyde emissions of our OSB 4 TOP correspond to emission similar to untreated wood.