OSB 4 TOP Straight Edge

Produktai
Taikymas

Our Egger OSB 4 TOP has many properties that go beyond the OSB 4 standard of EN 300. The very high load-bearing capacity and stiffness, as well as the high moisture resistance and dimensional stability, offer a high degree of safety in all construction applications.

They have a 3-layer structure of flat aligned strands (micro-veneers). The two cover layers are aligned parallel to each other, the middle layer is perpendicular to them. This layer structure is the reason for the good mechanical strength properties.

Tvarumas

CO2 pėdsakas*

-805 kg CO2e/m3 Bendrasis VAP
- 172 kg CO2e/m3 VAP dėl iškastinio kuro
- -978 kg CO2e/m3 VAP dėl biogeninio anglies dioksido
- 0,3 kg CO2e/m3 VAP dėl žemės naudojimo ir žemės naudojimo paskirties keitimo

Atsinaujinančių išteklių dalis**

92 % Atsinaujinantys ištekliai
7 % Iškastiniai ištekliai
1 % Mineraliniai ištekliai

Iš žiedinės ekonomikos gautų medžiagų dalis**

0 % Iš žiedinės ekonomikos gautos medžiagos
- 0 % Iki vartojimo etapo perdirbta medžiaga
- 0 % Po vartojimo etapo perdirbta medžiaga
- 0 % Lentpjūvių pramonės šalutiniai produktai
100 % Pirminės žaliavos

Perdirbamumas

*Visuotinio atšilimo potencialo (GWP) duomenys pateikti remiantis išoriškai patikrinta aplinkosaugine produkto deklaracija (EPD) pagal ISO 14025 ir EN 15804+A2 (modulio gamybos etapas A1–A3).

**Šis „EcoFact“ pagrįstas vidiniu skaičiavimu, naudojant gamybos duomenis.

What makes the OSB 4 TOP from EGGER so special

Thanks to its first-class properties, EGGER OSB 4 TOP is the ideal panel for timber construction – whether in roofs, walls, ceilings or floors. The OSB 4 TOP offers reliable and durable real timber construction quality:

stiffening,
secure vapour barrier
airtight level due to guaranteed minimum air permeability of ≤ 0.12 m³/(m²h) even for the highest requirements.

An overview of the advantages in application:

Available formats of up to 3.30m length allow ceiling height constructions and enable an economical and cut-optimized wall planking.
The EGGER OSB 4 TOP offers a hugher moisture resistance compared to OSB 3 which results in an improved dimensional stability. This leads to more safety on the construction site and in the building.
EGGER OSB 4 TOP with straight edges are produced in the thickness range from 12 to 25 mm with a guaranteed raw density of at least 620 kg/m3. As a result, they have a reduced burn-up rate and offer advantages in fire protection certification.
It goes without saying that we guarantee all properties through the comprehensive and meaningful CE declaration of performance (DoP).

Emisijos klasės

The production mainly uses fresh coniferous wood,a formaldehyde-free bonding system and paraffin wax. As a result, the formaldehyde emissions are well below all the currently known limit values of wood-based panels.

Our OSB 4 TOP is 100% bonded without formaldehyde. The formaldehyde emissions of our OSB 4 TOP correspond to emission similar to untreated wood.

Dokumentai ir atsisiuntimai

All documents

Processing instruction and leaflets

Kalbos pasirinkimas