DHF Vapour Permeable Sheathing Panel

Produktai
Taikymas

The EGGER DHF underlay board is a resin-bonded, medium-density fibreboard with CE marking in accordance with EN 14964 and EN 13986. The boards are bonded without formaldehyde and manufactured from untreated softwood sourced from by-products from the sawmill industry. This contributes to the efficient use of the raw material wood and meets the requirements for low formaldehyde emissions.

Tvarumas

CO2 pėdsakas*

-584 kg CO2e/m3 Bendrasis VAP
- 398 kg CO2e/m3 VAP dėl iškastinio kuro
- -983 kg CO2e/m3 VAP dėl biogeninio anglies dioksido
- 0,543 kg CO2e/m3 VAP dėl žemės naudojimo ir žemės naudojimo paskirties keitimo

Iš žiedinės ekonomikos gautų medžiagų dalis**

95 % Iš žiedinės ekonomikos gautos medžiagos
- 0 % Iki vartojimo etapo perdirbta medžiaga
- 0 % Po vartojimo etapo perdirbta medžiaga
- 100 % Lentpjūvių pramonės šalutiniai produktai
5 % Pirminės žaliavos

Atsinaujinančių išteklių dalis**

94 % Atsinaujinantys ištekliai
6 % Iškastiniai ištekliai
0 % Mineraliniai ištekliai

Perdirbamumas

*Visuotinio atšilimo potencialo (GWP) duomenys pateikti remiantis išoriškai patikrinta aplinkosaugine produkto deklaracija (EPD) pagal ISO 14025 ir EN 15804+A2 (modulio gamybos etapas A1–A3).

**Šis „EcoFact“ pagrįstas vidiniu skaičiavimu, naudojant gamybos duomenis.

This is what makes the EGGER DHF vapour permeable sheathing panel stand out – its advantages in application

The areas of application and properties of DHF panels are listed in the CE declaration of performance (DOP-506). With its properties, the Egger DHF is the suitable vapour permeable sheathing panel for the cladding of roofs and timber frame construction walls.

Rainproof vapour permeable sheathing panel, pucture-proof and windproof – three important functions are ensured in a single operation with the EGGER DHF panel.
Two months of free weathering of the boards as temporary roofing between March and November give you security in the construction process.
DHF panels are puncture-proof and create a walkable roof surface - for higher safety on the construction site.
With the tight tongue and groove profile, the board plane is windproof without additional measures.
The DHF panel is quickly installed, thanks to optimised tongue and groove profile and the printed nail grid.
A nail sealing tape under the counter battens is not required for EGGER DHF underlays and sub-roofs.
The guaranteed raw density of at least 600 kg/m³ in combination with a large-area installation with a few joints has a positive effect on the sound insulation and fire protection of building components.
With the different storey-high formats, stiffening timber frame construction walls without horizontal joints can be realised.
As a solid and stable board, the EGGER DHF offers additional protection against extreme weather events such as storms and hailstorms, even during the construction period.