EGGER particleboards raw JP F0.3 F* * * * /GB ENF MR are moisture-resistant glued boards, certified according to Japanese emission class F**** following JISA 5908. They meet the Chinese standard GB/T 39600 class ENF (Emission Non Formaldehyde) and are suitable for furniture and interior design for areas with increased air humidity. Particleboards consist of a stable middle layer and fine outer layers. These are ideal for surface finishes of all kinds. The board corresponds to Euroclass D-s2, d0.
Applications
- For furniture and interior design in areas with increased air humidity
Sustainability
-
<ul> <li>82 % Material from the circular economy<ul> <li>5 % Pre-consumer recycling material</li> <li>41 % Post-consumer recycling material</li> <li>54 % By-products from the sawmill industry</li> </ul> </li> <li>18 % Primary raw materials</li> </ul>
-
<ul> <li>-868 kg CO2e/m3 GWP-total<ul> <li>147 kg CO2e/m3 GWP-fossil</li> <li>-1010 kg CO2e/m3 GWP-biogenic</li> <li>0.2 kg CO2e/m3 GWP-luluc</li> </ul> </li> </ul>
-
<ul> <li>88 % Renewable resources</li> <li>12 % Fossil resources</li> <li>0 % Mineral resources</li> </ul>
-
Advantages
- Ideal for different coatings
- Resource-saving
Characteristics
- Moisture-resistant gluing for improved swelling behaviour
- Certified according to Japanese emission class F**** following JIS A 5908
- Meets Chinese standard GB/T 39600, class ENF (Emission Non Formaldehyde)
- Three-layer construction
- Good stability
- Use of wood from circular economy
- Recyclable
Documents and Downloads
All documents
Environmental Product Declaration (EPD)
Environmental and Health Datasheet (EHD)