Our Egger OSB 4 TOP has many properties that go beyond the OSB 4 standard of EN 300. The very high load-bearing capacity and stiffness, as well as the high moisture resistance and dimensional stability, offer a high degree of safety in all construction applications.
They have a 3-layer structure of flat aligned strands (micro-veneers). The two cover layers are aligned parallel to each other, the middle layer is perpendicular to them. This layer structure is the reason for the good mechanical strength properties.
Sustainability
-
100 % verified legal wood origin 50 % of that certified
-
-753 kg CO2-eq/m2
-
7 % wood from circular economy, 7 % of that by-products from sawmill industry, 93 % wood from sustainable forestry
-
93 % material from renewable resources
-
recyclable
The calculation of the values refers to the location Wismar.
What makes the OSB 4 TOP from EGGER so special
Thanks to its first-class properties, EGGER OSB 4 TOP is the ideal panel for timber construction – whether in roofs , walls , ceilings or floors . The OSB 4 TOP offers reliable and durable real timber construction quality:
- stiffening,
- secure vapour barrier
- airtight level due to guaranteed minimum air permeability of ≤ 0.12 m³/(m²h) even for the highest requirements.
An overview of the advantages in application:
- Available formats of up to 3.30m length allow ceiling height constructions and enable an economical and cut-optimized wall planking .
- The EGGER OSB 4 TOP offers a hugher moisture resistance compared to OSB 3 which results in an improved dimensional stability. This leads to more safety on the construction site and in the building.
- EGGER OSB 4 TOP with straight edges are produced in the thickness range from 12 to 25 mm with a guaranteed raw density of at least 620 kg/m3. As a result, they have a reduced burn-up rate and offer advantages in fire protection certification .
- It goes without saying that we guarantee all properties through the comprehensive and meaningful CE declaration of performance (DoP) .
Emissionsclasses
The production mainly uses fresh coniferous wood,a formaldehyde-free bonding system and paraffin wax. As a result, the formaldehyde emissions are well below all the currently known limit values of wood-based panels.
Our OSB 4 TOP is 100% bonded without formaldehyde. The formaldehyde emissions of our OSB 4 TOP correspond to emission similar to untreated wood.
Documents and Downloads
Case Studies
Modern wood construction for the future
The new production hall of Holzbau Albert Manser AG in Gonten/Appenzell, Switzerland, was completed last autumn.
The new production hall of Holzbau Albert Manser AG was built within a year.
Residential honeycombs for the Max-Otto-Bruker-Haus
To fulfil its guest's wishes, the health consulting company decided to build an apartment building, the architecture is inspired by honeycombs.
Herbs and lavender were planted on the roof.
Turning old into new
In Scheffau am Wilden Kaiser, space was created for three generations by adding storeys and renovating the old building
EGGER DHF and EGGER OSB 4 TOP for the wall structures.