Our detailed installation instructions and videos show you how to install our flooring. In these step by step instructions for our flooring click system
CLIC it!
, we tell you how to install our flooring and what you must take into account when doing so.
In what way can you install flooring?
In general there are two different ways of installing an EGGER floor. The installation method is based on the flooring type, the flooring composition and the application area, in other words the space where the flooring is being installed. Please take note of the information on the product packaging and the instruction leaflet. You can install all EGGER flooring in residential living areas as a floating installation.
Alternatively the moisture-resistant
Aqua+ laminate flooring
and
design flooring
can also be permanently glued over the full surface in residential settings. When used in commercial spaces, our Design flooring must be glued over the full surface.
Floating installation:
With this type of flooring installation, nothing is glued or screwed down. The individual flooringboards are simply connected together with the help of our flooring click system.
The flooring rests on the subfloor without a firm bond and can move freely. This is why we talk about “floating installation” here. Thanks to the EGGER flooring click systems, a floating installation is simple, quick and flexible.
Full-surface gluing:
In the case of full-surface gluing, the flooring is bonded with the subfloor using adhesive. The individual floor boards are firstly connected together with our UNI fit! flooring click system and then placed individually into the adhesive bed and pressed down. Full-surface gluing improves the ambient noise and walking comfort and is particularly suitable for installations over a large area .
Installing EGGER flooring
Here you can find an overview of which flooring click system you can use to install our three types of flooring (
Laminate Flooring
and
Design Flooring
).
For our laminate flooring you will find the information about the click system to be used in the instruction leaflet inside the box or on the packaging.
| Product | Flooring click system | Installation method |
| Laminate flooring | CLIC it! | floating |
| Laminate flooring Aqua+ | CLIC it! | floating / glued |
| Design flooring GreenTec | CLIC it! | floating / glued
|
Floating Installation with the CLIC it! installation system
- CLIC it! is a flooring installation system, which you can angle or tap at the header side.
- The system is multifunctional and saves time during installation because more than one person can work simultaneously.
- The flooring installation is done element by element resulting in a stable surface.
- You thereby achieve an excellent surface stability.
- The flooring can be used immediately after floating installation.
Installation of skirting boards
